As the driving power of power equipment, three-phase asynchronous motor is very common in daily production and life. However, three-phase asynchronous motor is divided into many functional characteristics. For example, many three-phase asynchronous motors supplied by Yongkun Motor Co., Ltd. include Y2 series ordinary asynchronous motors, YEJ, Y2EJ electromagnetic braking series asynchronous motors, YVP frequency conversion series motors, YD multi speed series motors, three-phase asynchronous motors for hard tooth reducer, cycloidal pin wheel motors, YL, YC, YY capacitor starting motors, ml, MC series motors.
No matter what kind of three-phase asynchronous motor, it can be divided into vertical and horizontal installation. As shown in Figure 1, it is in the form of vertical large flange, but the motor flange can be divided into different sizes. Therefore, there are B5, B14 that B5 represents the large flange, and B14 represents the small flange. Figure 2 shows the horizontal installation with feet, and some horizontal motors have feet and flanges, so there are B3 and B35 installation methods, because B3 represents horizontal installation with feet, and B35 represents horizontal installation with flange.
You can distinguish the differences of these three-phase asynchronous motors by comparing the following motor pictures. If you have any questions, you can consult Yongkun motor customer service at 400-0966-850

Previous：Why do most devices use three-phase asynchronous motors instead of single-phase motors

Next：Mechanical equipment matters, more attention to the reduction motor

Return